Machine Shop Services

Performance Auto Parts

Cylinder Blocks:

  • Thermal clean, Magnaflux® crack detection
  • Align Hone Main Journals
  • Install 4-bolt Main Caps
  • Install Cylinder sleeves
  • Deck Block, Parallel and 90° with BHJ® fixture
  • Bore & Diamond Hone with Head Plates
  • R&R Cam Bearings & Freeze plugs – (Brass freeze plugs optional)
  • Pressure check
  • Repair damaged threads
  • Custom weight removal on Bridgeport® Mill
  • Install Main, Head and oil pan studs
  • O Ring Block
  • Mill / Grind block for stroker clearance
  • Grind block for gear drive clearance
  • Drill / Tap for lifter valley “standpipes” SBC
  • Install wrist pin oilers – SBC
  • Install SBC ¾” “deck plugs” before decking block.
  • Mount “crank scraper” and verify clearance
  • Custom weight removal – Milling Machine
  • Oiling System modifications – per application
  • Fit rear Oil Pan Baffle to Oil Pan
  • Install “trash” screens – SBC / BBC
  • Fill Blocks w/”Hard Blok” for Drag Racing applications

Crankshafts:

  • Thermal clean, Magnaflux® crack detection, check for straightness
  • Submerged Arc Welding, Buildup for “Stroker” Crank
  • Straightening
  • Grind and Polish
  • Cross Drill
  • Custom detailing
  • Grind Flat / Stepped Flywheels
  • Custom Computerized Balancing
  • Automotive, Motorcycle and Lift Truck cranks

Cylinder Heads:

  • Thermal clean, Magnaflux® / Zyglo® crack detection
  • 3 & 5 Angle Valve jobs – using Mondello profiled cutters
  • Install Valve seats & guides
  • Install Bronzewall Guide Liners
  • Cut Guides for Teflon® PC seals
  • Surface to RMS  specs & Angle Mill
  • Pressure check
  • Set Valve Spring pressure & equalize
  • Machine spring seats
  • Machine guides for positive valve seals
  • Machine guides for Retainer-to-seal clearance
  • Port match Intakes – “Bowl” work
  • Flow / Verify Port velocity
  • Repair damaged threads & Spark plug threads
  • Install screw in studs – SBC – Machine for guide plates
  • CC Chamber & Port volumes
  • Machine pushrod opening for more lift/duration – SBC

Press Work

  • Press U Joints
  • Press axle bearings
  • Remove Pistons from Rods
  • Press Clutch “floaters” flat before grinding

MISC Nitrous bottles filled, using NOS® Nitrous pump VP® Racing Fuel – Racing Gas, Methanol, and Nitromethane available.

 

  Serdi Precision Cylinder Head Machining Center

Serdi® Precision Cylinder Head Machining Center

40 year Veteran Crank Grinder, James hard at work. One of the Best in Chicagoland area !

40 year Veteran Crank Grinder, James, hard at work on Seest® Crankshaft Grinder.  He’s One of the Best in the Chicago Land area !

Crankshaft Submerged Arc Welder

Crankshaft Submerged Arc Welder

Sunnen® CV-616 Hone with Early Hemi Block. We use Diamond Hones for correct finish.

Sunnen® CV-616 Hone with Early Hemi Block. We use Diamond Hones for correct finish.

Sunnen Align Hone. Insures crank bores are parallel and on size.

Sunnen® Align Hone. Insures crank bores are parallel and on size.

Kwik Way® Boring Bar and Fixture Table

Kwik Way® Boring Bar and Fixture Table

Motore Asincrono® Surfacing Machine - Variable Speed. NOTE: Cylinder head currently installed.

Motore Asincrono® Surfacing Machine – Variable Speed. NOTE: Cylinder head currently installed.

\

web counter web counter

Leave a Reply

Your email address will not be published. Required fields are marked *

*

In Archive